|
|
|
|
tenx MCU
> 4-bit MCU
> TM87 series
>MCU
|
|
|
TM8725 |
|
|
4-Bit Microcontroller |
|
TM8725 Data Sheet (Ver 1.0) (*.pdf) TM8725 User's Manual (English) Ver 1.0(*.pdf) tenx 4-bit Summary (*.pdf) |
|
Description:
The TM8725 is an embedded high-performance 4-bit microcomputer with LCD driver. It contains all the necessary functions, such as 4-bit parallel processing ALU, ROM, RAM, I/O ports, timer, clock generator, dual clock operation, Resistance to Frequency Converter (RFC), EL panel driver. LCD driver, look-up table, watchdog timer and key matrix scanning circuitry in a signal chip. |
|
Feature:
1. Low power dissipation.
2. Powerful instruction set (178 instructions).
- Binary addition, subtraction, BCD adjust, logical operation in direct and index addressing mode.
- Single-bit manipulation (set, reset decision for branch).
- Various conditional branch.
- 16 working registers and manipulation.
- Table look-up.
- LCD driver data transfer.
3. Memory capacity.
- ROM capacity: 3072 x 16 bits.
- RAM capacity: 384 x 4 bits.
4. LCD driver output.
- 6 common outputs and 40 segment outputs (up to drive 240 LCD segments).
- 1/2 Duty, 1/3 Duty, 1/5 Duty or 1/6 Duty is selected by MASK option.
- 1/2 Bisa or 1/3 Bias selected by MASK option.
- Single instruction to turn off all segments.
- COM5-~6, SEG1~40 could be defined as CMOS or P_open drain type output by mask option.
5. Input / output ports.
- Port IOA: 4 pins (with intermal pull-low), muxed with SEG24~SEG27.
- Port IOB: 4 pins (with internal pull-low), muxed with SEG28~SEG31.
- Port IOC: 4 pins (with intermal pull-low, low-level-hold), muxed with SEG32~SEG35. IOC port had built in the input signal chattering prevention circuitry.
- Port IOD: 4 pins (with internal pull-low), muxed with SEG36~SEG39. IOD port had built in the input signal chattering prevention circuitry.
6. 8 level subroutine nesting.
7. Interrupt function.
- External factors 4 (INT pin, Port IOC, IOD & KI input).
- Internal factors 4 (Pre-Divider, Timer 1, Timer 2 & RFC).
8. Built-in EL-light driver.
- ELC, ELP (Muxed with SEG28, SEG29).
9. Built in Alarm, clock or single tone melody generator.
- BZB, BZ (Muxed with SEG30, SEG31).
10. Built-in key matrix scanning function.
- CX, RR, RT, RH (Muxed with SEG24~SEG27).
11. Built in key matrix scanning function.
- K1~K16 (Shared with SEG1~SEG16).
12. KI1~KI4 (Muxed with SEG32~SEG35).
13. Two 6-bit programmable timer with programmable clock source.
14. Watch dog timer.
15. Built-in Voltage doubler, halver, tripler charge pump circuit.
16. Dual clock operation
- slow clock oscillation can be defined as X'tal or external RC type oscillator by mask option.
- fast clock oscillation can be defined as 3.58MHz ceramic resonator, internal R or external R type oscillator by mask option.
17. HALT function.
18. STOP function. |
|
|
|
Applications:
- Timer / Calendar / Calculator / Thermometer |
|
|
|
|
|