Download
Software Design
  Sensor
  Module
  Other
 
 
   
 
> > >  
 
   
         
MS5540C
Altimeter or Barometer Module    
to MS5534A the pressure range (measurement down to 10 mbar) has been improved. The MS550C is fully compatible to the MS54XX series of pressure sensors. Compared to the previous version the ESD sensitivity level has been improved to 4 kV on all pins. The gel protection of the sensor provides a water protection sufficient for 100m waterproof watches without any additional protection.
   
   
   
   
   
     
 
         
MS5541C
Miniature 14bar Module    
The MS5541C is the miniature version of the popular MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and the 16 Bit Micropower Sensor interface IC known from the MS5535C. Compared to the previous version the ESD sensitivity has been improved to 4 kV on all pins. In addition to this the MS5541C is from its outer dimensions compatible to the MS54xx series of pressure sensors. It uses an antimagnetic polished stainless steel ring for sealing with O-ring. The sensor provides 16 Bit pressure and temperature data via a 3 wire serial interface that can be easily interfaced with 4 Bit low power microcontrollers. 64 Bit of factory programmed PROM provides calibration data for a highly accurate pressure and temperature calculation. The MS5541C is fully software compatible to the MS5535C and previous versions of MS5541.
   
   
   
   
   
     
 
         
MS5561C
MS5561C Micro Altimeter    
The MS5561 is a SMD-hybrid device including a precision piezo-resistive pressure sensor and an ADC-Interface IC. It uses a three-wire serial interface for communication. The module dimensions of 4.75 x 4.25mm and a height only 1.6mm allows for up-to-date SMD design. It provides a 6 bit data word from a pressure and temperature dependent voltage. The MS5561 is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a micro-controller.
   
   
   
   
   
     
 
         
MS5607-02BA01
MS5607-02BA01 Micro Altimeter Module, with LCP cap    
The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. The sensor module includes a high linearity pressure sensor and an ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficientsˇK
   
   
   
   
   
     
 
         
MS5607-02BA03
MS5607-02BA03 Micro Altimeter Module, with stainless steel cap    
The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm. The sensor module includes a high linearity pressure sensor and an ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficientsˇK
   
   
   
   
   
     
 
         
MS5611-01BA01
MS5611-01BA01 Variometer Module, with LCP cap    
The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high linearity pressure sensor and an ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficients.
   
   
   
   
   
     
 
         
MS5611-01BA03
MS5611-01BA03 Variometer Module, with stainless steel cap    
The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I²C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high linearity pressure sensor and an ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficients.
   
   
   
   
   
     
 
         
TICE87N ICE
tenx emulator    
Support: TM8704, TM8705, TM8706, TM8712, TM8713,TM8722,TM8723,TM8726, TM8740, TM6811, TM6814, TM6820, TM6821, TM6840, TM6841
   
   
   
   
   
     
 
         
TICE87NB ICE
tenx emulator    
Support: TM8704, TM8705, TM8706, TM8712, TM8713,TM8722,TM8723,TM8726, TM8740, TM6811, TM6814, TM6820, TM6821, TM6840, TM6841, TM8795,TM87P08
   
   
   
   
   
     
 
         
TICE89
Development tools    
Supply MCU model: TM89 series and TM8727
   
   
   
   
   
     
 

ˇ@ ˇ@ page no.: of:4/8

 
2016 © - Everest Pacific Technology Co., Ltd.